About Features Tire
Certainly there are more tires than just being round objects related to cars to allow them to go places with ease. Tires must be sized and right to meet certain types of vehicle specifications. Here are some words about the features of it:Size - This, of course , talking about the tire conversion , and usually seen in the sidewall. For the convenience of motorists , tire manufacturers have tire sizes specified by width, height and diameter.
Temperature - This , on the other hand , indicates the tire's resistance to heat. Is generally represented by the letter A, B , or C , with obviously the highest and the lowest as C.
Traction - Traction describes the ability of the tire to meet the vehicle's brakes , even when wet . Such as temperature , is also seen with the lyrics , this time AA , A, B, and C , with A being the highest and the lowest C.
Wear - Wear , meanwhile , is able to withstand tire conversion wear compared to other tires. Typically , tire wear starts at 100 , so that if a tire conversion has a score of 150 for wear , means that the tire may last about 1.5 times more than the tires with a score of 100 .
About the size of tires and tire conversion
Today, we focus more on how to deal with the size and format conversion .
As mentioned , there is some time , the tire conversion sizes are to be printed on the side of the tire in such a format , the width specified first, followed by the entire height of the sidewall , then the rim diameter . Here is a representation of how the tire size is marked on the sidewall
Width / height / diameter
For the width , of course , all we have to do is get the tire conversion size in terms of how wide, and should be in millimeters.
The calculation starts with the second element , the height . This is because the height is normally indicated in the sidewall as a percentage , not millimeters . So if we get the exact size conversion of the height of the tire conversion in terms of millimeters , all you have to do is multiply the height of the roof, converted to decimal , the width of the tire. For example :
300/60/20
This means that the height is 60 % of the width of 300 mm . In other words , we have designed a tire conversion that has a height of 180 mm.
Furthermore, the diameter is generally designated in the side wall in terms of cm . To convert to millimeters , the typical formula is as follows :
(SIDE x 2 ) + WHEEL
So if , for example , we have a measuring wheel 406 mm , so converted as follows :
180 x 2 = 360 mm
360 + 406 = 766 mm
Meanwhile, here's another interesting fact about the conversion of tire conversion size is that we can also measure how well the tire conversion can travel per revolution through the numbers on the list. Also called the circumference of the tire. This is measured as follows :
DIAMETER * pi
If we use the example , the circumference of the tire conversion would be about 107,358 inches.